From: Rob Herring <robh@kernel.org>
To: Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Arnd Bergmann <arnd@arndb.de>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] powerpc: Use of_property_present() for testing DT property presence
Date: Fri, 10 Mar 2023 08:46:56 -0600 [thread overview]
Message-ID: <20230310144657.1541039-1-robh@kernel.org> (raw)
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
---
arch/powerpc/kernel/legacy_serial.c | 8 ++++----
arch/powerpc/platforms/44x/iss4xx.c | 2 +-
arch/powerpc/platforms/44x/ppc476.c | 2 +-
arch/powerpc/platforms/4xx/pci.c | 2 +-
arch/powerpc/platforms/cell/spu_manage.c | 2 +-
arch/powerpc/platforms/powermac/pic.c | 2 +-
arch/powerpc/platforms/powernv/opal-lpc.c | 2 +-
arch/powerpc/platforms/pseries/hotplug-cpu.c | 2 +-
arch/powerpc/platforms/pseries/vio.c | 2 +-
arch/powerpc/sysdev/mpic_msgr.c | 2 +-
10 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index f048c424c525..1a3b7f3513b4 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -171,11 +171,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
/* We only support ports that have a clock frequency properly
* encoded in the device-tree.
*/
- if (of_get_property(np, "clock-frequency", NULL) == NULL)
+ if (!of_property_present(np, "clock-frequency"))
return -1;
/* if reg-offset don't try to use it */
- if ((of_get_property(np, "reg-offset", NULL) != NULL))
+ if (of_property_present(np, "reg-offset"))
return -1;
/* if rtas uses this device, don't try to use it as well */
@@ -237,7 +237,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
* Note: Don't even try on P8 lpc, we know it's not directly mapped
*/
if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc") ||
- of_get_property(isa_brg, "ranges", NULL)) {
+ of_property_present(isa_brg, "ranges")) {
taddr = of_translate_address(np, reg);
if (taddr == OF_BAD_ADDR)
taddr = 0;
@@ -268,7 +268,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
* compatible UARTs on PCI need all sort of quirks (port offsets
* etc...) that this code doesn't know about
*/
- if (of_get_property(np, "clock-frequency", NULL) == NULL)
+ if (!of_property_present(np, "clock-frequency"))
return -1;
/* Get the PCI address. Assume BAR 0 */
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
index c5f82591408c..812765cf0632 100644
--- a/arch/powerpc/platforms/44x/iss4xx.c
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -52,7 +52,7 @@ static void __init iss4xx_init_irq(void)
/* Find top level interrupt controller */
for_each_node_with_property(np, "interrupt-controller") {
- if (of_get_property(np, "interrupts", NULL) == NULL)
+ if (!of_property_present(np, "interrupts"))
break;
}
if (np == NULL)
diff --git a/arch/powerpc/platforms/44x/ppc476.c b/arch/powerpc/platforms/44x/ppc476.c
index 7c91ac5a5241..70556fd10f6b 100644
--- a/arch/powerpc/platforms/44x/ppc476.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -122,7 +122,7 @@ static void __init ppc47x_init_irq(void)
/* Find top level interrupt controller */
for_each_node_with_property(np, "interrupt-controller") {
- if (of_get_property(np, "interrupts", NULL) == NULL)
+ if (!of_property_present(np, "interrupts"))
break;
}
if (np == NULL)
diff --git a/arch/powerpc/platforms/4xx/pci.c b/arch/powerpc/platforms/4xx/pci.c
index ca5dd7a5842a..70a055f76e5a 100644
--- a/arch/powerpc/platforms/4xx/pci.c
+++ b/arch/powerpc/platforms/4xx/pci.c
@@ -348,7 +348,7 @@ static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
}
/* Check if primary bridge */
- if (of_get_property(np, "primary", NULL))
+ if (of_property_present(np, "primary"))
primary = 1;
/* Get bus range if any */
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index f1ac4c742069..74567b32c48c 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -402,7 +402,7 @@ static int __init of_has_vicinity(void)
struct device_node *dn;
for_each_node_by_type(dn, "spe") {
- if (of_find_property(dn, "vicinity", NULL)) {
+ if (of_property_present(dn, "vicinity")) {
of_node_put(dn);
return 1;
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 8c8d8e0a7d13..3425065ab22e 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -476,7 +476,7 @@ static int __init pmac_pic_probe_mpic(void)
/* We can have up to 2 MPICs cascaded */
for_each_node_by_type(np, "open-pic") {
if (master == NULL &&
- of_get_property(np, "interrupts", NULL) == NULL)
+ !of_property_present(np, "interrupts"))
master = of_node_get(np);
else if (slave == NULL)
slave = of_node_get(np);
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index d129d6d45a50..a16f07cdab26 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -403,7 +403,7 @@ void __init opal_lpc_init(void)
return;
/* Does it support direct mapping ? */
- if (of_get_property(np, "ranges", NULL)) {
+ if (of_property_present(np, "ranges")) {
pr_info("OPAL: Found memory mapped LPC bus on chip %d\n",
opal_lpc_chip_id);
isa_bridge_init_non_pci(np);
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 982e5e4b5e06..1a3cb313976a 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -493,7 +493,7 @@ static bool valid_cpu_drc_index(struct device_node *parent, u32 drc_index)
bool found = false;
int rc, index;
- if (of_find_property(parent, "ibm,drc-info", NULL))
+ if (of_property_present(parent, "ibm,drc-info"))
return drc_info_valid_index(parent, drc_index);
/* Note that the format of the ibm,drc-indexes array is
diff --git a/arch/powerpc/platforms/pseries/vio.c b/arch/powerpc/platforms/pseries/vio.c
index 770df9351aaa..d54306a936d5 100644
--- a/arch/powerpc/platforms/pseries/vio.c
+++ b/arch/powerpc/platforms/pseries/vio.c
@@ -1440,7 +1440,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
viodev->dev.bus = &vio_bus_type;
viodev->dev.release = vio_dev_release;
- if (of_get_property(viodev->dev.of_node, "ibm,my-dma-window", NULL)) {
+ if (of_property_present(viodev->dev.of_node, "ibm,my-dma-window")) {
if (firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_set_dma_ops(viodev);
else
diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c
index d75064fb7d12..1a3ac0b5dd89 100644
--- a/arch/powerpc/sysdev/mpic_msgr.c
+++ b/arch/powerpc/sysdev/mpic_msgr.c
@@ -116,7 +116,7 @@ static unsigned int mpic_msgr_number_of_blocks(void)
for (;;) {
snprintf(buf, sizeof(buf), "mpic-msgr-block%d", count);
- if (!of_find_property(aliases, buf, NULL))
+ if (!of_property_present(aliases, buf))
break;
count += 1;
--
2.39.2
next reply other threads:[~2023-03-10 14:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-10 14:46 Rob Herring [this message]
2023-04-06 1:09 ` [PATCH] powerpc: Use of_property_present() for testing DT property presence Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230310144657.1541039-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=christophe.leroy@csgroup.eu \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.