From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: msuchanek@suse.de, herbert@gondor.apana.org.au,
wireguard@lists.zx2c4.com, dtsen@linux.ibm.com
Subject: [PATCH] powerpc/crypto/chacha-p10: Fix failure on non Power10
Date: Fri, 29 Mar 2024 00:02:00 +1100 [thread overview]
Message-ID: <20240328130200.3041687-1-mpe@ellerman.id.au> (raw)
The chacha-p10-crypto module provides optimised chacha routines for
Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it
provides chacha_crypt_arch() to generic code.
Notably the module needs to provide chacha_crypt_arch() regardless of
whether it is loaded on Power10 or an older CPU.
The implementation of chacha_crypt_arch() already has a fallback to
chacha_crypt_generic(), however the module as a whole fails to load on
pre-Power10, because of the use of module_cpu_feature_match().
This breaks for example loading wireguard:
jostaberry-1:~ # modprobe -v wireguard
insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst
modprobe: ERROR: could not insert 'wireguard': No such device
Fix it by removing module_cpu_feature_match(), and instead check the
CPU feature manually. If the CPU feature is not found, the module
still loads successfully, but doesn't register the Power10 specific
algorithms. That allows chacha_crypt_generic() to remain available for
use, fixing the problem.
[root@fedora ~]# modprobe -v wireguard
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko
[ 18.910452][ T721] wireguard: allowedips self-tests: pass
[ 18.914999][ T721] wireguard: nonce counter self-tests: pass
[ 19.029066][ T721] wireguard: ratelimiter self-tests: pass
[ 19.029257][ T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 19.029361][ T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/crypto/chacha-p10-glue.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/crypto/chacha-p10-glue.c b/arch/powerpc/crypto/chacha-p10-glue.c
index 74fb86b0d209..7c728755852e 100644
--- a/arch/powerpc/crypto/chacha-p10-glue.c
+++ b/arch/powerpc/crypto/chacha-p10-glue.c
@@ -197,6 +197,9 @@ static struct skcipher_alg algs[] = {
static int __init chacha_p10_init(void)
{
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return 0;
+
static_branch_enable(&have_p10);
return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
@@ -204,10 +207,13 @@ static int __init chacha_p10_init(void)
static void __exit chacha_p10_exit(void)
{
+ if (!static_branch_likely(&have_p10))
+ return;
+
crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
}
-module_cpu_feature_match(PPC_MODULE_FEATURE_P10, chacha_p10_init);
+module_init(chacha_p10_init);
module_exit(chacha_p10_exit);
MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (P10 accelerated)");
--
2.44.0
WARNING: multiple messages have this Message-ID (diff)
From: Michael Ellerman <mpe@ellerman.id.au>
To: <linuxppc-dev@lists.ozlabs.org>
Cc: dtsen@linux.ibm.com, msuchanek@suse.de,
herbert@gondor.apana.org.au, wireguard@lists.zx2c4.com
Subject: [PATCH] powerpc/crypto/chacha-p10: Fix failure on non Power10
Date: Fri, 29 Mar 2024 00:02:00 +1100 [thread overview]
Message-ID: <20240328130200.3041687-1-mpe@ellerman.id.au> (raw)
The chacha-p10-crypto module provides optimised chacha routines for
Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it
provides chacha_crypt_arch() to generic code.
Notably the module needs to provide chacha_crypt_arch() regardless of
whether it is loaded on Power10 or an older CPU.
The implementation of chacha_crypt_arch() already has a fallback to
chacha_crypt_generic(), however the module as a whole fails to load on
pre-Power10, because of the use of module_cpu_feature_match().
This breaks for example loading wireguard:
jostaberry-1:~ # modprobe -v wireguard
insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst
modprobe: ERROR: could not insert 'wireguard': No such device
Fix it by removing module_cpu_feature_match(), and instead check the
CPU feature manually. If the CPU feature is not found, the module
still loads successfully, but doesn't register the Power10 specific
algorithms. That allows chacha_crypt_generic() to remain available for
use, fixing the problem.
[root@fedora ~]# modprobe -v wireguard
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko
insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko
[ 18.910452][ T721] wireguard: allowedips self-tests: pass
[ 18.914999][ T721] wireguard: nonce counter self-tests: pass
[ 19.029066][ T721] wireguard: ratelimiter self-tests: pass
[ 19.029257][ T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 19.029361][ T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/crypto/chacha-p10-glue.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/crypto/chacha-p10-glue.c b/arch/powerpc/crypto/chacha-p10-glue.c
index 74fb86b0d209..7c728755852e 100644
--- a/arch/powerpc/crypto/chacha-p10-glue.c
+++ b/arch/powerpc/crypto/chacha-p10-glue.c
@@ -197,6 +197,9 @@ static struct skcipher_alg algs[] = {
static int __init chacha_p10_init(void)
{
+ if (!cpu_has_feature(CPU_FTR_ARCH_31))
+ return 0;
+
static_branch_enable(&have_p10);
return crypto_register_skciphers(algs, ARRAY_SIZE(algs));
@@ -204,10 +207,13 @@ static int __init chacha_p10_init(void)
static void __exit chacha_p10_exit(void)
{
+ if (!static_branch_likely(&have_p10))
+ return;
+
crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
}
-module_cpu_feature_match(PPC_MODULE_FEATURE_P10, chacha_p10_init);
+module_init(chacha_p10_init);
module_exit(chacha_p10_exit);
MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (P10 accelerated)");
--
2.44.0
next reply other threads:[~2024-03-28 13:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-28 13:02 Michael Ellerman [this message]
2024-03-28 13:02 ` [PATCH] powerpc/crypto/chacha-p10: Fix failure on non Power10 Michael Ellerman
2024-04-02 6:36 ` Herbert Xu
2024-04-02 6:36 ` Herbert Xu
2024-04-22 9:21 ` Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240328130200.3041687-1-mpe@ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=dtsen@linux.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=msuchanek@suse.de \
--cc=wireguard@lists.zx2c4.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.