All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vaishnav Achath <vaishnav.a@ti.com>
To: <broonie@kernel.org>
Cc: <linux-spi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<vigneshr@ti.com>, <u-kumar1@ti.com>, <vaishnav.a@ti.com>
Subject: [PATCH] spi: omap2-mcspi: Revert FIFO support without DMA
Date: Mon, 12 Feb 2024 17:30:49 +0530	[thread overview]
Message-ID: <20240212120049.438495-1-vaishnav.a@ti.com> (raw)

MCSPI controller have few limitations regarding the transaction
size when the FIFO buffer is enabled and the WCNT feature is used
to find the end of word, in this case if WCNT is not a multiple of
the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
generated correctly. In addition to this limitation, few other unknown
sequence of events that causes the FIFO empty status to not reflect the
exact status were found when FIFO is being used without DMA enabled
during extended testing in AM65x platform. Till the exact root cause
is found and fixed, revert the FIFO support without DMA.

See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
for further details: http://www.ti.com/lit/pdf/spruil1

This reverts commit 75223bbea840e125359fc63942b5f93462b474c6.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---
 drivers/spi/spi-omap2-mcspi.c | 137 ++--------------------------------
 1 file changed, 8 insertions(+), 129 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index a0c9fea908f5..ddf1c684bcc7 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -53,8 +53,6 @@
 
 /* per-register bitmasks: */
 #define OMAP2_MCSPI_IRQSTATUS_EOW	BIT(17)
-#define OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY    BIT(0)
-#define OMAP2_MCSPI_IRQSTATUS_RX0_FULL    BIT(2)
 
 #define OMAP2_MCSPI_MODULCTRL_SINGLE	BIT(0)
 #define OMAP2_MCSPI_MODULCTRL_MS	BIT(2)
@@ -293,7 +291,7 @@ static void omap2_mcspi_set_mode(struct spi_controller *ctlr)
 }
 
 static void omap2_mcspi_set_fifo(const struct spi_device *spi,
-				struct spi_transfer *t, int enable, int dma_enabled)
+				struct spi_transfer *t, int enable)
 {
 	struct spi_controller *ctlr = spi->controller;
 	struct omap2_mcspi_cs *cs = spi->controller_state;
@@ -314,28 +312,20 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
 		else
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
-		if (dma_enabled)
-			wcnt = t->len / bytes_per_word;
-		else
-			wcnt = 0;
+
+		wcnt = t->len / bytes_per_word;
 		if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
 			goto disable_fifo;
 
 		xferlevel = wcnt << 16;
 		if (t->rx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFER;
-			if (dma_enabled)
-				xferlevel |= (bytes_per_word - 1) << 8;
-			else
-				xferlevel |= (max_fifo_depth - 1) << 8;
+			xferlevel |= (bytes_per_word - 1) << 8;
 		}
 
 		if (t->tx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFET;
-			if (dma_enabled)
-				xferlevel |= bytes_per_word - 1;
-			else
-				xferlevel |= (max_fifo_depth - 1);
+			xferlevel |= bytes_per_word - 1;
 		}
 
 		mcspi_write_reg(ctlr, OMAP2_MCSPI_XFERLEVEL, xferlevel);
@@ -892,113 +882,6 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
 	return count - c;
 }
 
-static unsigned
-omap2_mcspi_txrx_piofifo(struct spi_device *spi, struct spi_transfer *xfer)
-{
-	struct omap2_mcspi_cs	*cs = spi->controller_state;
-	struct omap2_mcspi    *mcspi;
-	unsigned int		count, c;
-	unsigned int		iter, cwc;
-	int last_request;
-	void __iomem		*base = cs->base;
-	void __iomem		*tx_reg;
-	void __iomem		*rx_reg;
-	void __iomem		*chstat_reg;
-	void __iomem        *irqstat_reg;
-	int			word_len, bytes_per_word;
-	u8		*rx;
-	const u8	*tx;
-
-	mcspi = spi_controller_get_devdata(spi->controller);
-	count = xfer->len;
-	c = count;
-	word_len = cs->word_len;
-	bytes_per_word = mcspi_bytes_per_word(word_len);
-
-	/*
-	 * We store the pre-calculated register addresses on stack to speed
-	 * up the transfer loop.
-	 */
-	tx_reg		= base + OMAP2_MCSPI_TX0;
-	rx_reg		= base + OMAP2_MCSPI_RX0;
-	chstat_reg	= base + OMAP2_MCSPI_CHSTAT0;
-	irqstat_reg    = base + OMAP2_MCSPI_IRQSTATUS;
-
-	if (c < (word_len >> 3))
-		return 0;
-
-	rx = xfer->rx_buf;
-	tx = xfer->tx_buf;
-
-	do {
-		/* calculate number of words in current iteration */
-		cwc = min((unsigned int)mcspi->fifo_depth / bytes_per_word,
-			  c / bytes_per_word);
-		last_request = cwc != (mcspi->fifo_depth / bytes_per_word);
-		if (tx) {
-			if (mcspi_wait_for_reg_bit(irqstat_reg,
-						   OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY) < 0) {
-				dev_err(&spi->dev, "TX Empty timed out\n");
-				goto out;
-			}
-			writel_relaxed(OMAP2_MCSPI_IRQSTATUS_TX0_EMPTY, irqstat_reg);
-
-			for (iter = 0; iter < cwc; iter++, tx += bytes_per_word) {
-				if (bytes_per_word == 1)
-					writel_relaxed(*tx, tx_reg);
-				else if (bytes_per_word == 2)
-					writel_relaxed(*((u16 *)tx), tx_reg);
-				else if (bytes_per_word == 4)
-					writel_relaxed(*((u32 *)tx), tx_reg);
-			}
-		}
-
-		if (rx) {
-			if (!last_request &&
-			    mcspi_wait_for_reg_bit(irqstat_reg,
-						   OMAP2_MCSPI_IRQSTATUS_RX0_FULL) < 0) {
-				dev_err(&spi->dev, "RX_FULL timed out\n");
-				goto out;
-			}
-			writel_relaxed(OMAP2_MCSPI_IRQSTATUS_RX0_FULL, irqstat_reg);
-
-			for (iter = 0; iter < cwc; iter++, rx += bytes_per_word) {
-				if (last_request &&
-				    mcspi_wait_for_reg_bit(chstat_reg,
-							   OMAP2_MCSPI_CHSTAT_RXS) < 0) {
-					dev_err(&spi->dev, "RXS timed out\n");
-					goto out;
-				}
-				if (bytes_per_word == 1)
-					*rx = readl_relaxed(rx_reg);
-				else if (bytes_per_word == 2)
-					*((u16 *)rx) = readl_relaxed(rx_reg);
-				else if (bytes_per_word == 4)
-					*((u32 *)rx) = readl_relaxed(rx_reg);
-			}
-		}
-
-		if (last_request) {
-			if (mcspi_wait_for_reg_bit(chstat_reg,
-						   OMAP2_MCSPI_CHSTAT_EOT) < 0) {
-				dev_err(&spi->dev, "EOT timed out\n");
-				goto out;
-			}
-			if (mcspi_wait_for_reg_bit(chstat_reg,
-						   OMAP2_MCSPI_CHSTAT_TXFFE) < 0) {
-				dev_err(&spi->dev, "TXFFE timed out\n");
-				goto out;
-			}
-			omap2_mcspi_set_enable(spi, 0);
-		}
-		c -= cwc * bytes_per_word;
-	} while (c >= bytes_per_word);
-
-out:
-	omap2_mcspi_set_enable(spi, 1);
-	return count - c;
-}
-
 static u32 omap2_mcspi_calc_divisor(u32 speed_hz, u32 ref_clk_hz)
 {
 	u32 div;
@@ -1323,9 +1206,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
 		    ctlr->cur_msg_mapped &&
 		    ctlr->can_dma(ctlr, spi, t))
-			omap2_mcspi_set_fifo(spi, t, 1, 1);
-		else if (t->len > OMAP2_MCSPI_MAX_FIFODEPTH)
-			omap2_mcspi_set_fifo(spi, t, 1, 0);
+			omap2_mcspi_set_fifo(spi, t, 1);
 
 		omap2_mcspi_set_enable(spi, 1);
 
@@ -1338,8 +1219,6 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		    ctlr->cur_msg_mapped &&
 		    ctlr->can_dma(ctlr, spi, t))
 			count = omap2_mcspi_txrx_dma(spi, t);
-		else if (mcspi->fifo_depth > 0)
-			count = omap2_mcspi_txrx_piofifo(spi, t);
 		else
 			count = omap2_mcspi_txrx_pio(spi, t);
 
@@ -1352,7 +1231,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 	omap2_mcspi_set_enable(spi, 0);
 
 	if (mcspi->fifo_depth > 0)
-		omap2_mcspi_set_fifo(spi, t, 0, 0);
+		omap2_mcspi_set_fifo(spi, t, 0);
 
 out:
 	/* Restore defaults if they were overriden */
@@ -1375,7 +1254,7 @@ static int omap2_mcspi_transfer_one(struct spi_controller *ctlr,
 		omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
 
 	if (mcspi->fifo_depth > 0 && t)
-		omap2_mcspi_set_fifo(spi, t, 0, 0);
+		omap2_mcspi_set_fifo(spi, t, 0);
 
 	return status;
 }
-- 
2.34.1


             reply	other threads:[~2024-02-12 12:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-12 12:00 Vaishnav Achath [this message]
2024-02-12 12:59 ` [PATCH] spi: omap2-mcspi: Revert FIFO support without DMA Mark Brown
2024-02-12 15:33 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240212120049.438495-1-vaishnav.a@ti.com \
    --to=vaishnav.a@ti.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.